Table Hardware
|
|
|
|
|
|
|
Table Hardware |
|
Table
Hardware
|
Page1
Move to Page <2> |
||||
 |
S-3600
APRON LEG BRACKETS Heavy gauge steel brackets to hold together the four corners of the table apron and provide a means of fastening the leg to the bracket A hanger screw is driven into the leg and locked into,place through the bracket with a wing nut. S-3620 U: 1-1/2" high by 3" wide S-3621 U: 1-3/4" high x 3"wide S-3622 U: 2" high x 4-3/4" wide S-3625 U: 2-1/2" high x 4-3/4" wide |
 |
|
|
XTAF
TABLE TOP FASTENERS Screwed into the underside of the table top, XTAF locks into grooves in the table apron to fasten the apron to the top. Extra heavy 14 gauge steel for strength and durability. XTAF1-1: 1/2" wide XTAF1-2: 3/4" wide XTAF1-3: 1" wide |
 |
 |
XTLV-1
U
TABLE TOP EVENER Heavy 16 gauge ribbed steel to keep divided table tops on an even level. 1-1/2" long X 3/4" wide. |
 |
|
P-1010
B
X-100B P PIN & SOCKET TABLE LEAF ALIGNERS Table pins (male) and sockets (female) ensure positive alignment of table leaves and avoid distortion due to expansion and contraction. P-1010 B Dark Brown Nylon (25/64"diameter} Bore holes with our X-290/1 Omm flat bottom borer. X-100B P Brass plated steel (5/16" diameter} Bore holes with our X-290/8mm flat bottom borer. |
 |
 |
P-25-80
B
P-25-81 B PLASTIC TABLE PINS Tan Rolyethylene pins with glue-retainer ribs. Will not shrink, swell or rust. Smooth, self-lubricating. P-25-80 B: 5/16" diam. x 31/32" long P-25-81 B: 3/8" diameter x 1-1/4" long |
|
Table
Hardware
Move
to Page <2>
|
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |
