Assembly Fittings
|
|
|
|
|
|
|
Assembly Fittings |
|
Miscellaneous
Fittings
|
 |
LEG
MOUNTING PLATES
S-325STRT U for vertical legs S-325ANGL U for 10° angled legs Tempered .067 steel plates with 5/16-18 steel nut staked in the center. 2-3/4" x 2-3/4" with 5 holes for fastening with #11 screws. Flat or angled. |
|
DESKTOP
FASTENER |
 |
 |
PANEL
RETAINER CLIP
X-226 L Formed steel clip with 3/16" recess, fastens with #6 screw. Used to hold glass, panel or grille in door frame. |
|
UTILITY
FASTENING BLOCK
P-O675 B Brown molded polyethylene blocks for right-angle fixing of "modesty panels" on desks. 1/2"X1/2"x1-3/8" long. Holes in two directions for #8 screws. |
 |
 |
XCRB/1
CORNER BRACE The popular "1 x1 " corner brace, used to reinforce corner joints on chairs and tables is of formed steel 1-/12" x 1-1/2" x 7 /8" wide. Its nickname "1 x1 " is derived from the fact the holes are each 1" from the corner. Use #12 or #13 countersunk screws. XCRB/1 U (unplated) XCRB/1 P(Brassed) XCRB/1 L (Bronzed) |
|
P-37-781
B
SHIPPING PROTECTOR FOR DOORS AND DRAWERS Pins are driven into concealed stile and flat part is bent over the door or drawer to prevent opening during shipment. Steel is coated with a sleeve of plastic to prevent marring the finish. 1/2" wide x 2-1/4" long. |
 |
 |
COVERS
FOR MILLIMETER SIZE HOLES
The European fitting system generally leaves excess holes and polyethylene hole covers make these less unsightly. Generally Black, White, Brown and Almond (Eggshell) are stocked Other sizes (20,25,35 mm) and colors available on special order.
|
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |