Selby Furniture Hardware Co. Inc.-The Houdini of Hardware



	Assembly Fittings

Connectors

	K-71026 Allen "15" Connecto-Locks 1/4-20 threads to fit Selby barrel nuts for rapid secure jointing. Steel, brass or bronze plated. Heads are 15mm. diam. x 3/32" thick.
	F-15/51 P (2" bolt, brass-plated) F-15/63 P (2-1/2" bolt, brass-plated) F-15/76 P (3" bolt, brass plated) F-15/90 P (3-1/2" bolt, brass plated)		F-15/51 L (2" bolt, bronze-plated) F-15/63 L (2-1/2" bolt, bronze plated) F-15/76 L (3" bolt, bronze-plated) F-15/90 L (3-1/2" bolt, bronze plated)

F-580 (N. 4)
F-581 (N. 5)
Allen Socket wrenches.
Low-priced steel wrenches.
No. 4 fits the Allen "15" Connecto-Locks and the K-71025/700 series.
No.5 fits the K-71025/800 series.

KGB
Steel Barrel Nuts
1/4-20 threaded to mate with Allen "15" Connecto-Locks and standard 1/4-20 socket head bolts. Slot is parallel to hole to line up with inserted bolt. Supplied with holes centered on barrel or off-center (1/4" from bottom).

1/4-20 THREAD By 3/8" DIAM.
*KGB97EX (9/16" long)
*KGB98EX (3/4" long)
KGB98 (3/4" long)
*KGB16EX (5/8" long)
*KGB22EX (7/8" long)

5116-18 THREAD x 112" DIAM.
*KGB96EX (3/4" long)
KGB96 (3/4" long)

*=off center holes
BOLD TYPE (stock item)
LIGHT TYPE (Special Order)

Allen Head K-71025
Pozidriv K-15314
Phillips Head F-582
Panel Connecting Screws with Cover Caps
Knife-edge threads hold in flakeboard or solid.
Cover caps in white, almond or brown.

Reference No.	Body Diam.	Length	Head Type
K-71025/738	7mm.	1-1/2"	Allen No. 4
K-71025/738	7mm.	1-3/4"	Allen No. 4
K-71025/738	7mm.	2-1/8"	Allen No. 4
K-71025/738	8mm.	1-1/2"	Allen No. 5
K-71025/738	8mm.	1-3/4"	Allen No. 5
K-71025/738	8mm.	2"	Allen No. 5
K-71025/738	7mm.	1-1/2"	Pozidriv
K-71025/738	7mm.	2"	Pozidriv
K-71025/738	5mm.	1-3/8"	Phillips
K-71025/738	5mm.	1-5/8"	Phillips
K-71025/738	5mm.	2"	Phillips

K-52168 U
Counter-Top Joiner
A strong concealed fitting for precision joining of counter-tops. Die-cast metal half-moons with a 3-1/8" steel hanger bolt and hex nut. Drill a 35mm. hole (minimum depth of 5/8") 1-1/4"-1-1/2" from the edge to be joined. A 7/32" cross-hole will pass the bolt. Nothing protrudes underneath.

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware