Selby Furniture Hardware Co. Inc.-The Houdini of Hardware



	Assembly Fittings

Assembly Fittings

Page4
Move to Page <1> <2> <3> <5> <6>

P-2507 W
P-660 W
Nylon Dowel Connectors
Reverse threads hold glue in each panel opposite the direction of pull.

Reference	Hole Size	Length	Panel Size
P-2507 W	8mm (5/16)	30mm (1-3/16")	1/2" to 5/8"
P-660 W	10mm (3/8")	38mm (1-1/2")	3/4" to 7/8"

P-630 W
P-632 W
Snap Together Nylon Joiners
Drill holes, insert with glue and snap together. For permanent or temporary joints in ply or flake.

P-630 W: Barbed nylon dowel for 1/4" dia. hole x 2" long and bushing for 1/2" dia. hole x 7/16" long.

P-632 W: Two bushings for 1/2" dia. hole x 7/16" long with double-end snap-in dowel.

P-650 W
P-651 W
Nylon Screw Anchors
For fast assembly/disassembly. UF bonding in plywood, chipboard or flakeboard.

P-650 W: 5/16" diam. x 1" long for N. 10 sheet-metal screw or 10/24 machine screw.

P-651 W: 5/16" diam. x 1/2" long for N. 8 sheet-metal screw or 8/32 machine screw.

K-2541/2 W
Nylon Snap-together Joiner
Male and female take the same boring, 1omm (3/8") diameter x 1omm (3/8") deep. Rigid attachment. Hard or dense woods do not require gluing.

P-25-174 W
P-2520 W
P-2521 W
Nylon Right-Angle Miter Dowels
Unique indents on side furniture adhesives to IT to resist pullout. For mitered joints in chip-core case goods and mirror or door frames.

P-25-174 w 1-3/8"x1-3/8", 3/8"OD hole x 1"

P-2520 w 1" x 1", 1/4" OD hole x 3/4" long

P-2521 w 1-3/16"x1-3/16", 5/26"OD hole x 7/8" long

Assembly Fittings Move to Page <1> <2> <3> <5> <6>

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware