Selby Furniture Hardware Co. Inc.-The Houdini of Hardware



	Assembly Fittings

Assembly Fittings

Page3
Move to Page <1> <2> <4> <5> <6>

	K-2020 TAPER CONNECTORS Wedge shaped fasteners ease job of hanging or connecting flush fixtures, provide an invisible joint of great strength for beds, chair backs, chair arms, wall-hung cabinets etc. Extra heavy gauge cold-rolled steel, only 1/4" thick x 5/8" wide. Easy. insertion locks tight with pressure when bottoming K-2020/2: 2"long K-2020/4: 4"long K-2020/6: 6"long

K-280
RAPID CORNER JOINTS (patented)
Strong corner jointing where rapid assembly and disassembly are required. For prefabricated sheds, partitions, shelving, counters, cases etc. Supplied in sets of 2 interlocking "lefts" and 2 interlocking "rights" (2 corners). Lighter use medium grade steE Nickel or statuary bronze finishes on .060 steel.
K-280SM: 3/4"x3/4"x1-1/2"
K-280LG: 1"x1"x2"

K-65100/11
EXTRA HEAVY CORNER JOINTS
Heavy gauge steel wedge-action corner jointing for on-the-job assembly. Interlocking parts need no machining, attach with screws. For wood parts 4"-8" wide, wider units may use two assemblies. The greater the pressure, the tighter the joint! Supplied in sets of 8 pieces (four corners).
7/8"x7/8"x3-3/4"long.
Nickel-plated on .106" steel

Assembly Fittings Move to Page <1> <2> <4> <5> <6>

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware