Selby Furniture Hardware Co. Inc.-The Houdini of Hardware

Original No-Mortise Butt Hinges

H-266 SERIES
NO-MORTISE, NO_MACHINING BUTT HINGE
Our factory makes over half-a-million a week because this is the workhorse hinge of the furniture industry.
No mortising, no machining, no cutting-in!
The hinge leaves only 1/16" gap!
H-266 with plain ends. Comes in 4 sizes:
1-1/2", 2", 2-1/2" and 3"
Statuary bronze and polished brass finishes on steel.
H-266L (loose pin assembly) comes in 2" and 2-1/2" sizes.
Statuary bronze and polished brass finishes on steel.

HFHX266 with finial ends comes in 1-1/2", 2", 2-1/2" and 3" sizes.
Light Antique Brass finish on steel.
Special order: Polished Chrome, Antique Brass, Epoxy White or Black
1-1/2", 2" and 2-1/2" in cartons of 300.
3" packed 150 per carton.

Model	Size	Leaf	Screw	Assembly	End
H-266/1+	1-1/2"X13/16"	5/8"	#4	TIGHT PIN	PLAIN
H-266/2	2"X15/16"	11/16"	#4	TIGHT PIN	PLAIN
H-266/2+	2-1/2"X1"	3/4"	#5	TIGHT PIN	PLAIN
H-266/3	3"X1-5/16"	1"	#5	TIGHT PIN	PLAIN
H-266L/2	2"X15/16"	11/16"	#4	LOOSE PIN	BALL
H-266L/2+	2-1/2"X1"	3/4"	#5	LOOSE PIN	BALL
HFHX266/1+	2-1/2"X13/16"	5/8"	#4	TIGHT PIN	FINIAL
HFHX266/2	3-1/16"X15/16"	11/16"	#4	TIGHT PIN	FINIAL
HFHX266/2+	3-9/16"X1"	3/4"	#5	TIGHT PIN	FINIAL
HFHX266/3	4-3/8"X1-5/16"	1"	#5	TIGHT PIN	FINIAL

Lengths are Overall(Tip-To-Tip)

HSTP266
HFHX266STP
125° NO-MORTISE S-T-O-P HINGES
For recessed doors or projecting moldings, this hinge will stop the door opening at an angle of 125°
PLAIN ENDS, STAT: BRONZE FINISH ON STEEL
HSTP266/2 L: 2"Long X 15/16" wide with 11/16" leaf
HSTP266/2+ L: 2-1/2"Long x 1 "wide with 3/4" leaf
FINIAL ENDS, ANTIQUE BRASS FINISH ON STEEL
HFHX266/2STD: 3-1/16"Long x 15/16"wide with 11/16" lea HFHX266/2+ST: 3-9/16"Long x 1 "wide with 3/4" leaf

H-378F L
HFHX378F D
No-MORTISE W-I-D-E PATTERN HINGE
For inset doors or conditions requiring a deeper throw.
H-378F L: 2"Long x 1-3/16"wide with 1" leaf
Plain ends, Stat. Bronze finish on steel
HFHX378F D: 3-1/16"Long x 1-3/16"wide with 1"leaf
Finial ends,Antique Brass finish on steel

INTRODUCED BY SELBY OVER 40 YEARS AGO!
IMITATED BUT NEVER EQUALED!

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware



	Hinges