Selby Furniture Hardware Co. Inc.-The Houdini of Hardware



	Hinges

Hinges Main Section

Forte 400

	Built to surpass US ANSI/BHMA standards Approved by the furniture testing institutes in Germany, England, France and Italy.
Cut down on inventory costs and storage space! The Forte 400 enables you to use the same hinge for both regular function and for snap-on, snap-off applications, simply by changing the mounting plate! And with only two thicknesses of mounting plates, you can cover all door applications.

35mm x 11mm deep	Opening	Woodscrew	Ø10 bushing	Ø5 Euroscrew
Full Overlay	95°	HK4030/0	HK4032/0	HK4033/0
Full Overlay	110°	HK4130/0	HK4132/0	HK4133/0
5mm Reveal	95°	HW4030/5	HW4032/5	HW4033/5
5mm Reveal	110°	HW4130/5	HW4132/5	HW4133/5
Half Overlay(9mm)	95°	HX4030/9	HX4032/9	HX4033/9
Half Overlay(9mm)	110°	HX4130/9	HX4132/9	HX4133/9
Full Inset	95°	HY4030/17	HY4032/17	HY4033/17
Full Inset	110°	HY4130/17	HY4132/17	HY4133/17

Mounting Plate

2mm

4mm

Hole Distance "D"

3mm

4mm

5mm

6mm

7mm

8mm

3mm

4mm

5mm

6mm

7mm

8mm

Overlays Side "S"

17mm

18mm

19mm

20mm

21mm

22mm

15mm

16mm

17mm

18mm

19mm

20mm

Table based on full overlay hinge
"D" = distance of hole from edge of door
"S" = Overlay of end panel with 5mm cranked hinge, deduct 5mm from "S". With 9mm(half overlay) hinge, deduct 9mm from "S"

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware