Selby Furniture Hardware Co. Inc.-The Houdini of Hardware

Continuous & Vanity Hinges

ROLLED PIANO HINGES
Hinges by the yard! No waste!
Handy to use 100 ft. coils. .032 gauge cold-rolled steel.
Holes on 2-3/8" centers.
1-1/16 open width for #4 screws
1-1/4" open width for #5 screws
1-1/2" open width for #5 screws
2" open width for #6 screws.
Nickel, Polished Brass or Stat. Bronze

PIANO HINGES IN 6-FOOT LENGTHS

STANDARD (LIGHT GAUGE) FOR GENERAL USE
Steel, Brass, Nickel, Chrome or Bronze Plated
Knuckle Length: 5/8" Hole Spacing: 2-3/8" 600-ft. per case.
1-1/16" open(.032 gauge)
1-1/4" open (.035 gauge)
1.1/2" open (.036 gauge)

U.S. SPECIFICATION HEAVY GAUGE
Steel: Brass, Nickel, Chrome or Stat. Bronze Plated
Knuckle Length: 1/2" Hole Spacing: 2" 600-ft. per case
1-1/16" x .040 gauge for # 4 screws
1-1/4" x .040 gauge for #5 screws
1-1/2" x .040 gauge for #5 screws
2" x .045 gauge for #6 screws

Available on special order: Cut-to-size lengths, alternate hole spacing,lengths over 6-ft and special colors.

H-612 N
VANITY SIDE-MIRROR HINGES
Nickel-plated steel, lift-off construction, lefts & rights
Built-in friction pivot prevents "overswing".
For unframed panels, rubber insulation protects mirror.

H-85RS N
VANITY CENTER-MIRROR HINGE
Nickel-plated steel, locking-pivot, reversible
For tilting central mirror on vanities with screw-control on pivot to prevent slipping.
Also recommended for tilting secretary chairbacks.

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware



	Hinges