Selby Furniture Hardware Co. Inc.-The Houdini of Hardware

Page4
Move to Page <1> <2> <3> <5>

D-6415T/F
D-6415T
"No-Shimmy" CAPTIVE-ROLLER SLIDES
Guided-rolling with wheels on right side captive in "U-shaped" track to ensure straight motion without "shimmy". Left side is free to accommodate slight variances in drawer widths. Smooth, silent running on special Delrin-and-steel wheels. Epoxy-coated finishes in white, brown and almond especially valuable for high humidity areas.
*lengths from 12" to 24"
*rated at 50lbs. per pair on 16" size
*screw-hole centers on multiples of 32mm
*drawer extension 4" less than slide length
*accommodates drawer variances up to 3/16"
*for bottom-of-drawer mounting or side-of-drawer
*cabinet member adjustable vertically up-and-down
*drawer member adjustable side-to-side and front-to-back
*parallel holes to accept either normal sheet-metal screws or 5mm "Euro"screws.
D-6415T/F: rear roller mounted on raised tab for ease of insertion also available with angled channel for self-closing
D-6415T: straight low-profile for under-top mounting
Above slides also available as SELF.CLOSING or SIDE- MOUNT

D-6415/14 KEY
DROP-FRONT CAPTIVE SLIDE
For keyboard extraction, drop-front desk-drawers or for extra accessibility in tight places!
A captive slide similar to D-6415T/F above but with a hinged front bracket which locks in the vertical position when closed but permits the drawer front to drop when open.
Steel, rust-free epoxy-coated with Delrin rollers.
14" long, black epoxy color.
Special order: 12", 16" or 18" lengths.
White, Brown or Almond.
D-6415/14"KEY and D-6416/16"KEY stocked in black or white baked epoxy color Other lengths and colors to order.

Drawer Slides Move to Page <1> <2> <3> <5>

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware