Selby Furniture Hardware Co. Inc.-The Houdini of Hardware



	Drawer Slides

Drawer Slides

Page2
Move to Page <1> <3> <4> <5>

D-8817
Double-Acting MINI Slides (22Ib. Rating)
Only 17mm nigh by 10mm wide!
Precision-rolled steel channels fitted to steel ball-bearings a nylon carrier insure a vibration-free, smooth-as-silk, rolling action for lighter drawer loads, desk trays, shelves, computer keyboard pullouts. Especially preferred for drawers with 17mm side grooves. All holes on 32mm centers. May be attached with wood screws from the outside or with M4 machine screws from the inside into pre-tapped holes.
No lefts or rights reversible. Travel exceeds length of side!

Reference	Drawer Side (female)	Drawer Side (male)	Drawer Length	Length of Travel
D-8817/155	155mm(6-1/8")	155mm(6-1/8")	8-1/2"-10"	6-1/2"
D-8817/187	187mm(7-3/8")	182mm(7-1/8")	10-1/2"-13"	8-7/8"
D-8817/219	219mm(8-5/8")	214mm(8-3/8")	13-1/2"-15"	11-1/2"
D-8817/251	251mm(9-7/8")	246mm(9-5/8")	15-1/2"-17"	13-1/2"
D-8817/283	283mm(11-1/8")	278mm(11")	17-1/2"-20"	16-1/2"
D-8817/315	315mm(13-3/8")	310mm(12-1/4")	20-1/2"-22-1/2"	19"
D-8817/347	347mm(13-5/8")	342mm(13-1/2")	23"-25-1/2"	21-1/2"

Any customsize available in quantity. Specify length of male and female needed.

D-841
Rated at 35lb.
MICROFORM Double-Action 27mm Slide
cabinet member screws to cabinet side but drawer predrilled holes in back and bottom to drop into pins on drawer member--easy installing, easy removal! No screws needed for drawer insertion! drawer load. Double action provides for short slides to accommodate long drawers. 27mm high with only 3/8" space between drawer and cabinet. All-steel, 24 steel ball bearings per slide for smooth, controlled rolling. Holes in bottom and back of drawer engage two projecting pins on each drawer member.

Model	Slide Length	Drawer Size	Drawer Extend
D-841/22N	8-3/8"	14"	11-1/4"
D-841/25N	9-5/8"	16-5/8"	13-7/8"
D-841/28N	11"	19-1/8"	16-3/8"
D-841/31N	12-1/4"	21-5/8"	18-7/8"
D-841/34N	13-1/2"	24-1/8"	21-3/8"
D-841/37N	14-3/4"	26-3/4"	24"

D-8800
Rated at 35lb.
Side-Mounting 27mm Double-Action Slide
Dimensions and specifications are same as D-841 above but without the pin projections and and with screwholes for side-mounting of both members.

D-707
Economy Phonograph Slides
Brown epoxy-lacquered steel, ball-bearing assembly for smooth, vibration-free operation. Inner member separable for ease of installation. Require 3/4" clearance on each side.

Model	Length Inner	Length Outer	Travel	Max. Load/pr
D-707/13	13"	9"	9"	60 lbs.
D-707/15	15"	11"	11"	55 lbs.
D-707/16	16"	13"	12"	50 lbs.
D-707/18	18"	15"	15"	45 lbs.

15" size available in heavy duty model (75 lbs.) as D-15"FONO S

Drawer Slides Move to Page <1> <3> <4> <5>

Shelf Hardware	Lighting Fixtures	Casters & Glides	Drawer Slides	Hinges	Assembly Fittings	Locks & Accessories	Catches
Panel & Grille Retainers	Swivels & Accessories	Stays & Lid Supports	Table Hardware	Wardrobe & PullOuts	Electric Mechanisms	Sleep Systems	Authentic Brass Reproduction Hardware