Casters
and Glides
|
|
|
|
Casters
and Glides
|
|
Height
Adjustment Glides
|
 |
GBOLTM8
The Original MB Super Levelers SLOTTED-TOP SWIVEL-BASE ADJUSTERS Height adjustable with screw-driver from inside the case after installed. Base pivots and swivels to conform to floor. All-steer with polyethylene cover on bottom to protect carpeting. Hole covers in white, brown or black to fit 3/8" hole. M8 thread (5/16" diameter) in 5 lengths: |
|
|
GBOLTM8X60
U: 2-1/2" long
GBOLTM8X75 U: 3" long GBOLTM8X90 U: 3-1/2" long GBOLTM8X100 U: 4" long GBOLTM8X116 U: 4-1/2" long Fastenings: GDBLANGLM8 U: U-shaped angle of 1/8" steel, wall-mount 1-5/8"high x 1-7/16" wide x 1-1/8" deep for #10 screws GSINGANGLM8 U: Right-angle bracket for wall-mount 3/4"high x 1-1/2" wide x 1-1/4" deep for #9 screws FM8TNUT U: 4-prong T -nut, 7/16" long, undershelf-mount |
 |
|
|
GF118
Plastic-base Glide
GFS118 Metal-covered Glide STEEL SCREW GLIDE WITH HEX-NUT A rigid non-swivel glide with incorporated hex nut for adjustability with wrench. Screw 1" long. GF118-1/4: White or Black Nylon, 1/4-20 thread GF118-5/16: White or Black Nylon, 5/16-18 thread GFS118-1/4: Brass or Nickel cover, 1/4-20 thread GFS118-5/16: Brass or Nickel cover, 5/16-18 thread Special Order: 3/8-16 threaded screws FASTENINGS: Propeller Nuts or S-prong T -nuts I |
 |
 |
GB
SERIES
STEEL SHELL "SILENT" GLIDES Rigid adjustable glides with rubber cushion inside chrome-plated steel shells. G-6BO N: 7/8" diam. base, 1/4-20x1" screw G-12BO N: 1-1/16 diam. base, 1/4-20x1" screw G-206BO N: 1-1/4" diam. base, 1/4-20 x1" screw G-356BO N: 1-1/2" diam. base, 1/4-20x1" screw GQQ72 N: 1-1/4" diam. base, 5/16-18x1-1/2" screw |
 |
G-33
RIGID POLYETHYLENE ADJUSTABLE GLIDES Ribbed-edge polyethylene glides. Neutral tan color . 1" Long x 1/4-20 steel screw G-33-124: 5/8" diameter base G-33-130: 3/4" diameter base G-33-131: 7/8" diameter base G-33-132: 1" diameter base G-33-133: 1-1/8" diameter base GQ33-124SP: 5/8" diameter base with 1/4"x1-1/4" screw For Application With T-Nuts or Propeller Nuts |
 |
 |
G-33-134
SWIVEL ADJUSTABLE GLIDE Screw projection 1" long x 1/4-20 thread with 1-5/16" diameter swivel base in neutral tan injection-molded polyethylene. For use with propeller nuts or 3-prong T-nuts. |
 |
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |