Lighting
Fixtures
|
|
|
|
Lighting
Fixtures
|
|
Breakfront
& Curio Lighting
|
|
Halogen
Lighting
|
 |
INTENSE
LIGHTING WITH TINY BULBS AND LOW WATTAGE!
X-2032 SWIVEL EYEBALL 12-VOLT FIXTURE Complete sets ready to plug together. Incorporated spring-clips attach lamp through a 3-3/16" diam. hole without screws. Rim (4-3/8" diam.) projects 3/16" below top surface and eyeball swivels to concentrate light where desired. Lacquered Polished Brass or Baked Black Epoxy finishes. |
|
| X-2032/2
P (Brass) X-2032/2 S (B1ack) 2 fixtures 2 20-watt HALOGEN bulbs 1 5O-watt UL-CSA transformer |
X-2032/3
P (Brass) X-2032/3 S (Black) 3 fixtures 3 20-watt HALOGEN bulbs 1 75-watt UL-CSA transformer |
|
 |
 |
 |
|
EASY
INSTALLATION: (3-1/2" HOLE)
1. After you have drilled the proper size hole, attach the 2 spring clips to the sides of the fixtures. Insert the fixture into the hole with the long arms upright inside the opening. The shorter arms will be underneath the shell. |
2.
Gently slide the fixture upwards. Place paper between the shell and the
short arms of the spring clip to protect the finish
|
3. When the fixture is fully inserted, the long arm will snap down over the top to secure fixture. |
|
Halogen
Information
Halogen lights use very low voltage and give light equal to more than twice incandscent lights of the same wattage. Since the voltage is so low, 12 V instead of 110V, they last much longer...over 1500 hours! All Selby halogens are supplied with protective lenses and with over-strength UL-CSA approved transformers with DOUBLE PROTECTION against overloading and short circuits. All Selby halogens are made to snap-in to the transformers, making assembly a matter of seconds and all sets are also available as individual components. Whenever it may be necessary to replace a light bulb, try to avoid touching directly with the fingers as oil on the skin reduces bulb-life. |
|
REPLACEMENT
HALOGEN BULBS
12VOLT 20WATT |
REPLACEMENT
INCANDESCENT BULBS
110VOLT 25WATT |
||
 |
 |
||
|
XHALBLBJC20
For X-688, X-690, X-2633 |
XHALBLBMR16
For X-2032 |
XE17BULB
For XSMDOWNLITE |
XT10BULB
For XSCABLITE |
|
Incandescent
Lighting
|
|
XCABLITE
CURIO CABINET 110V FIXTURE For mounting on cabinet ceiling or behind shelf for back reflection with two screws through steel bracket. UL-CSA approved, supplied with 7-feet of cord, molded , 2-prong plug and 25-watt standard Edison base lamp. Reflector is baked brown walnut on steel exterior. 8-1/4" long x 1-3/4" high. Rugged construction |
 |
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |